Gas Turbine (Combined Cycle) - Training Guide
============================================================

MINIMUM RESOLUTION: 980 x 600 px
RECOMMENDED: 1920 x 1080 (16:9) or larger

SIMULATOR OVERVIEW
----------------------------------------
Combined-cycle gas turbine simulator with compressor, combustor, and HRSG sections per ISO 2314 and IEC 61850 SCADA protocols.

Standards: ISO 2314 · IEC 61850 · API 616

INTERFACE LAYOUT
----------------------------------------
- LEFT PANEL: System controls (Start/Stop/ESD/Reset, Mode toggle)
- CENTER: P&ID schematic with real-time process visualization
- RIGHT PANEL: System gauges, operational checklist, alarm list

OPERATING PROCEDURES
----------------------------------------
  Step 1: Pre-start checks complete
  Step 2: Start auxiliary systems (lube oil, cooling)
  Step 3: Initiate cranking sequence
  Step 4: Achieve ignition — flame detected
  Step 5: Accelerate to rated speed
  Step 6: Synchronize generator to grid
  Step 7: Load GT to base load
  Step 8: Start HRSG — steam generation

SCENARIOS
----------------------------------------

  Start-up & Synchronization:
  Complete cranking, ignition, warm-up, and synchronize GT to grid.

  Compressor Surge Response:
  Detect and recover from compressor surge event while maintaining grid stability.

  Load Following Operation:
  Respond to grid demand changes using IGV modulation and fuel control.

ALARM RESPONSE
----------------------------------------
  SURGE_DETECT [ALARM]: Compressor surge detected
  FIRING_TEMP_HIGH [ALARM]: Combustor firing temperature limit exceeded
  EXH_TEMP_SPREAD [WARNING]: Exhaust temperature spread >30°C
  LO_PRESS_LOW [ALARM]: Lube oil pressure low
  FLAME_OUT [ALARM]: Combustor flame-out detected

CONTROLS
--------
- START: Begin process operation
- STOP: Normal shutdown
- EMERGENCY STOP: Immediate shutdown of all systems
- RESET: Clear ESD condition and reset to standby
- TOGGLE MODE: Switch between Manual and Auto control
- Fullscreen: Click the fullscreen button in header
- EXIT: Return to BlueSim portal
- HELP: Opens this training guide