Solar PV System Monitoring - Training Guide
============================================================

MINIMUM RESOLUTION: 980 x 600 px
RECOMMENDED: 1920 x 1080 (16:9) or larger

SIMULATOR OVERVIEW
----------------------------------------
Solar photovoltaic system monitoring simulator covering array performance, MPPT tracking, inverter operation, and grid-tie per IEC 61724 and IEEE 1547.

Standards: IEC 61724 · IEEE 1547 · NEC 690

INTERFACE LAYOUT
----------------------------------------
- LEFT PANEL: System controls (Start/Stop/ESD/Reset, Mode toggle)
- CENTER: P&ID schematic with real-time process visualization
- RIGHT PANEL: System gauges, operational checklist, alarm list

OPERATING PROCEDURES
----------------------------------------
  Step 1: Verify DC disconnect switches open
  Step 2: Check string voltages — all within range
  Step 3: Close DC disconnect switches
  Step 4: Start inverter — MPPT tracking active
  Step 5: Verify AC output power and grid sync
  Step 6: Monitor string currents for mismatch
  Step 7: Confirm anti-islanding protection active
  Step 8: Record performance ratio

SCENARIOS
----------------------------------------

  Clear Day Operation:
  Monitor PV array from sunrise to sunset, track MPPT and inverter efficiency.

  String Fault Diagnosis:
  Identify and isolate a faulted PV string — ground fault and arc-fault.

  Cloud Transient Response:
  Manage rapid irradiance changes and inverter ramp-rate limiting.

ALARM RESPONSE
----------------------------------------
  ARC_FAULT [ALARM]: DC arc-fault detected on string
  GROUND_FAULT [ALARM]: Ground fault isolation failure
  INV_OVERTEMP [WARNING]: Inverter temperature approaching limit
  GRID_FREQ_DEV [WARNING]: Grid frequency deviation >0.5 Hz
  LOW_INSULATION [WARNING]: Low insulation resistance detected

CONTROLS
--------
- START: Begin process operation
- STOP: Normal shutdown
- EMERGENCY STOP: Immediate shutdown of all systems
- RESET: Clear ESD condition and reset to standby
- TOGGLE MODE: Switch between Manual and Auto control
- Fullscreen: Click the fullscreen button in header
- EXIT: Return to BlueSim portal
- HELP: Opens this training guide