Tank Farm Operations - Training Guide
============================================================

MINIMUM RESOLUTION: 980 x 600 px
RECOMMENDED: 1920 x 1080 (16:9) or larger

SIMULATOR OVERVIEW
----------------------------------------
Tank farm operations simulator covering tank gauging, transfer operations, overfill protection, and vapor recovery per API 2350 and API 650.

Standards: API 2350 · API 650 · API 2000 · OSHA PSM

INTERFACE LAYOUT
----------------------------------------
- LEFT PANEL: System controls (Start/Stop/ESD/Reset, Mode toggle)
- CENTER: P&ID schematic with real-time process visualization
- RIGHT PANEL: System gauges, operational checklist, alarm list

OPERATING PROCEDURES
----------------------------------------
  Step 1: Verify tank gauging operational
  Step 2: Line up transfer valves
  Step 3: Open suction and discharge valves
  Step 4: Start transfer pump
  Step 5: Monitor source and destination levels
  Step 6: Verify overfill protection armed
  Step 7: Complete transfer — stop pump
  Step 8: Record final gauging readings

SCENARIOS
----------------------------------------

  Product Transfer:
  Execute tank-to-tank transfer — line up valves, start pump, monitor levels.

  Overfill Prevention:
  Test high-level and high-high-level SIS per API 2350.

  Blending Operation:
  Blend two products to target specification using ratio control.

ALARM RESPONSE
----------------------------------------
  OVERFILL [ALARM]: Tank high-high level — SIS activated
  LEVEL_HIGH [WARNING]: Tank high level alarm
  LEAK_DETECT [ALARM]: Leak detection system activated
  VAPOR_HIGH [WARNING]: Vapor space pressure high
  PUMP_TRIP [WARNING]: Transfer pump tripped

CONTROLS
--------
- START: Begin process operation
- STOP: Normal shutdown
- EMERGENCY STOP: Immediate shutdown of all systems
- RESET: Clear ESD condition and reset to standby
- TOGGLE MODE: Switch between Manual and Auto control
- Fullscreen: Click the fullscreen button in header
- EXIT: Return to BlueSim portal
- HELP: Opens this training guide