Wind Turbine Operation & SCADA - Training Guide
============================================================

MINIMUM RESOLUTION: 980 x 600 px
RECOMMENDED: 1920 x 1080 (16:9) or larger

SIMULATOR OVERVIEW
----------------------------------------
Wind turbine SCADA simulator covering pitch control, yaw alignment, generator torque, and grid-feed per IEC 61400 and GL Guidelines.

Standards: IEC 61400 · GL Guidelines · IEEE 1547

INTERFACE LAYOUT
----------------------------------------
- LEFT PANEL: System controls (Start/Stop/ESD/Reset, Mode toggle)
- CENTER: P&ID schematic with real-time process visualization
- RIGHT PANEL: System gauges, operational checklist, alarm list

OPERATING PROCEDURES
----------------------------------------
  Step 1: Pre-start safety checks complete
  Step 2: Release rotor brake
  Step 3: Enable yaw control — align to wind
  Step 4: Pitch blades from feather to operating angle
  Step 5: Achieve cut-in speed — generator online
  Step 6: Ramp power output to rated
  Step 7: Monitor SCADA parameters
  Step 8: Confirm power curve tracking

SCENARIOS
----------------------------------------

  Normal Power Curve Operation:
  Monitor turbine from cut-in through rated wind speed, optimizing TSR.

  High Wind Shutdown:
  Execute controlled shutdown as wind exceeds cut-out speed.

  Pitch System Fault:
  Respond to pitch actuator failure on one blade — emergency procedures.

ALARM RESPONSE
----------------------------------------
  OVERSPEED [ALARM]: Rotor overspeed — pitch to feather
  PITCH_FAULT [ALARM]: Pitch actuator failure
  YAW_MISALIGN [WARNING]: Yaw misalignment >15°
  GEARBOX_TEMP [WARNING]: Gearbox oil temperature high
  GRID_LOSS [ALARM]: Grid connection lost

CONTROLS
--------
- START: Begin process operation
- STOP: Normal shutdown
- EMERGENCY STOP: Immediate shutdown of all systems
- RESET: Clear ESD condition and reset to standby
- TOGGLE MODE: Switch between Manual and Auto control
- Fullscreen: Click the fullscreen button in header
- EXIT: Return to BlueSim portal
- HELP: Opens this training guide